Portable Fire Extinguishers Dry Powder (Cartridge type) in 5/10 Kg Capacity with ISI mark and Mobile Fire Extinguisher 50 Kg offered by Alert conforms to IS:2171/10658. These products which are sturdy and reliable are manufactured under strict Quality Control.

The raw material used to fabricate the Fire Extinguisher conforms to IS Specifications.

Dry Chemical Powder Type Fire Extinguisher is effective for BC and electrical fires. It can be used on fires involving flammable liquids such as Petrol, Paraffin, Oil, Varnishes, Paints, Spirits and Solvents as also on gaseous ores like LPG and Acetylene. Because of its non-conductivity, it is ideally suited for electrical fires (Mixed occupancies) as well operated these extinguishers expel the Dry Chemical Powder which can be directed on to quench it instantly.

These Fire Extinguishers have greater fire killing properties and can be easily operated and allow free flow of chemical powder.

SPECIFICATION

Carbon-Di-Oxide Type Fire Extinguisher

Alert brand CO2-2 Kg / 3 Kg / 4.5 Kg / 6.5 Kg / 9 Kg / 22.5 Kg conforming to IS: 2878 with ISI mark is manufactured with stringent Quality Control and ensures highest degree of workmanship and reliability of performance to tackle B and C Class of Fires. To ensure highest Quality, best in put material are used most of them being ISI marked product quality record are kept for each batch in the enclosed format.

Each Cylinder is subjected to rigorous leakage test.

The correctly designed Syphon tube of the cylinder ensures the highest discharge mostly between 99% to 100%.

Each Cylinder is painted by applying one coat of surfacer followed by two thin coats of Branded Paint to 80 – 100 microns.

SPECIFICATION

When fire starts, so does confusion, it often becomes difficult to pick the right kind of extinguisher for the different types of fire. Precious time is lost. Wrong use of Extinguishers can be sometimes fatal and the very purpose of fighting a fire is lost.

Alert introduces non-conductive ABC type of fire Extinguisher, which is a powerful fire killer to fight A + b + C + Electrically started fire + D (Optional).

The powder (Extinguishant of ABC)
Siliconised mono ammonium phosphate is the main Extinguishant. It is manufactured as per IS: 14609 with controlled apparent density, particle size distribution and is water repellent. It under goes heat test, fire knock down test etc. Mono ammonium phosphate is the costliest and most effective ingredient in the powder.

SPECIFICATION

Alert Water (Soda Acid) upright and inverted and Water CO2 type fire extinguishers are assigned for use against out-breaks of fire where general materials such as wood, paper, fabric etc. (Class ‘A’ Fire) are involved. Speedy in action and easy to use, the Alert fire extinguishers have greater fire killing power. When operated, these extinguishers expel a jet of water, which can be directed on to the fire to quench it instantly.

The Soda Acid hand portable models, both upright and inverted types, of 9 ltrs. Capacity conforms to IS: 934. The water CO2 type conforms to IS: 940.       

SPECIFICATION

Foam Type Fire Extinguisher

Foam producing type Fire Extinguishers type offered by Alert are highly effective where Petrol, Paraffin, Oil, Varnishes, Spirits, Flammable liquid (Class AB) fire are involved. It is speedy by in action and easy to use. The Fire Extinguishers supplied by Alert have greater fire killing power. When operated these Extinguishers expel a jet of foam, which can be directed on to the fire to quench it instantly.

Mechanical Foam (AFFF) Extinguishers conforms to IS: 10204 with ISI mark. All these Extinguishers are fitted with gunmetal unions.

SPECIFICATION

PRODUCTS RANGE

NOTE: OUR SERVICE ENGINEER WILL VISIT YOUR SITE AND DESIGN AN OPTIMUM FIRE PREVENTION PLAN FOR YOU.

Contact:

Regd. Office:

Firdous Complex,
44/1 Residency Road,
Bangalore - 560 025
Ph: 080 - 2558 2267 / 25581366 / 2558 2276
Fax: 080 - 2558 2276
E-mail: alert@alertindia.net
Grams: ALERT

A console to control and monitor the Fire Alarm System peripherals and to initiate warning and identify the afected area. Fully solid state, modular fire alarm control panel of sheet metal is tailor made to suit customer's requirements. Operates on 230 VAC and 24 VDC

This detector is a combination of fixed and rate of rise in temperature operating elements. This detector responds when the predetermined temperature is reached or when the rise in ambient temperature exceeds the predetermined amount. Suitable for installation in areas where smoke / dust is likely to be present.

A console to Repeat the Main Fire Alarm Control Panel's indications. The repeater panel is manufactured to suit the customer's requirements. Operates on 24 VCD supplied by the main Contrl Panel.

Manual Call Point is a manually operated device to initiate an alarm. These are made of sturdy M.S. enclosure and are provided with a harmer to break the glass to initiate an alarm.

Ionization Smoke detectors are suitable for a wide range of industrial, commercial and residential applications and operate on the principle of Ionisation. On entry of smoke into the "Open Chamber" of the detector, the resistance caused is measured and transmitted to the Control Panel, which in turn, initiates a Fire alarm.

The electronic hooter / speaker is housed in a sturdy M.S. enclosure, capable of producing dual tone (fire alarm). These hooters can also be connected to an amplifier for public address as well. Operates on 24 V.D.C. and can be surface or flush mounted.

Photo-electric detectors operate on the light scattering effect. A light source is beamed into an area not normally seen by a photo sensitive element. These detectors are preferred where large particulars of combustion are to be detected.

The Response Indicator, also known as the Remote Response Indicator, as the name suggests, is to visually indicate response of a Detector, located in remote (hidden) areas, such as above the false ceiling, below the false floor and inside rooms which are normally kept closed or are looked after office hours.

Single headed Gun Metal Hydrant valve with flanged inlet, stop valve, spindle and cast iron hand wheel. It has a female instantaneous outlet with Blank Cap and is Hydrostatically tested to 21 Kgf/cm2 pressure having a flow rate of 900 LPM at 7 Kgf/cm2 of pressure. It is generally used for external and internal installations. This conforms to IS:5290.

Double headed Gun Metal hydrant valve with flanged inlet, 2 Nos. stop valve, spindles and Cast Iron hand wheels and 2 Nos. female outlets with Blank caps. It is Hydrostatically tested to 21 Kgf/cm2 pressure and has a flow rate of 1800 LPM at 7 Kgf/cm2 of pressure. It is generally used as an internal hydrant in High Rise Buildings and as an external hydrant for refineries. This conforms to IS:2190 type 'B'.

Hose coupling are made of Gun Metal. These couplings are instantaneous type and are wound with Copper / G.I wire at either ends of the delivery hose. These couplings are available in 28 mm dia., 50 mm dia. and 63 mm dia. as per IS:903/93, standard item being of 63 mm dia.

It is a tapered Gun Metal nozzle having 63 mm dia. instanteneous type male inlet and on the other side a hexagonal nozzle of 20 mm dia. Bore which gives a jet of water. The branch pipe conforms to IS:903/93

Hose Cabinet is fabricated out of MS sheet metal having glass fronted twin doors with locking arrangement and having a built-in key box. The cabinet is suitable to house 2 Nos. of houses and a branch pipe. The cabinet is painted with P.O. Red outside and white paint inside.

Fire Brigade inlet connection consists of 2 or 4 numbers of built-in Non Return Valves fixed on a manifold and fabricated MS pipe. Manifold is connected to the underground hydrant mains as well as to the sump with isolation valve and housed in a MS cabinet and painted with P.O red paint.

First aid hose reel is made out of MS sheet, consisting of Hose guide on which Rubber hose of 19 mm dia, of required length is kept wound. It has a swinging type motion which allows a 180° swing and conforms to IS:884/85

This is a flexible pipe which is bound on one side with male and on the other side with femal instanteneous type Gyn Metal coupling pair. Hoses are available in lengths of 7.5 mtrs length and the same can be supplied in the conventional "Flax" canvas type, impregnated rubber to control percolation type or the hose with a special 8 layer latex tube inside and a specially quoted synthetic hjacket outside.

Super jet water monitor is specially designed for fixing on hudrant stand posts or on a specially built trolley in case of protable units. Monitor rotates 360° and elevates between +150° to -20° with flow rate upto 2700 LPM at 7 Kgf/cm2. Conforms to IS:8442. Generally water monitors are used in Oil Jetties, Oil Refineries and Chemical Plants etc.

Air Cushion tank is cylindrical in shape and the same is fixed on top of the piping system and painted P.O red. It is fabricated of MS sheet of 4 mm thickness having dished ends on either sides. Bottom end has 25 mm dia. inlet connection with gate valve and the top end has a Gun Metal spring loaded Air release valve to facilitate release of pressure.